1 Kings 7:32

THE MESSAGE

Parallel Translations

Christian Standard Bible®
There were four wheels under the frames, and the wheel axles were part of the water cart; each wheel was twenty-seven inches tall.

Hebrew Names Version
The four wheels were underneath the panels; and the axles of the wheels were in the base: and the height of a wheel was a cubit and half a cubit.

King James Version
And under the borders were four wheels; and the axletrees of the wheels were joined to the base: and the height of a wheel was a cubit and half a cubit.

English Standard Version
And the four wheels were underneath the panels. The axles of the wheels were of one piece with the stands, and the height of a wheel was a cubit and a half.

New Century Version
The four wheels, placed under the frame, were twenty-seven inches high. The axles between the wheels were made as one piece with the stand.

New English Translation
The four wheels were under the frames and the crossbars of the axles were connected to the stand. Each wheel was two and one-quarter feet high.

Amplified Bible
Underneath the borders were four wheels, and the axles of the wheels were on the stand. And the height of a wheel was a cubit and a half.

New American Standard Bible
The four wheels were underneath the borders, and the axles of the wheels were on the stand. And the height of a wheel was a cubit and a half.

Geneva Bible (1587)
And vnder the borders were foure wheeles, and the axeltrees of the wheeles ioyned to the base: and the height of a wheele was a cubite and halfe a cubite.

Legacy Standard Bible
And the four wheels were underneath the borders, and the axles of the wheels were on the stand. And the height of a wheel was a cubit and a half.

Contemporary English Version
and the wheels and axles were underneath them. The wheels were about twenty-seven inches high

Complete Jewish Bible
The four wheels were under the panels, and the axles for the wheels were attached to the trolleys; each wheel was two-and-a-half feet.

Darby Translation
And the four wheels were under the panels; and the supports of the wheels were in the base; and the height of a wheel was a cubit and half a cubit.

Easy-to-Read Version
There were four wheels under the frame. The wheels were 1 1/2 cubits in diameter. The axles between the wheels were made as one piece with the cart.

George Lamsa Translation
And under each border were four wheels; and the axletrees of the wheels were joined to the base; and the height of a wheel was a cubit and a half.

Good News Translation
The wheels were 25 inches high; they were under the panels, and the axles were of one piece with the carts.

Lexham English Bible
Four of the wheels were underneath the frames, and the axles of the wheels were on the stands. The height of each wheel was a cubit and a half.

Literal Translation
And the four wheels were under the borders. And the hands of the wheels were in the base; and the height of the one wheel was a cubit and a half.

Miles Coverdale Bible (1535)
The foure wheles stode beneth by the sydes, & the axeltrees of the wheles were harde on ye seate. Euery whele was a cubite and a halfe hye,

American Standard Version
And the four wheels were underneath the panels; and the axletrees of the wheels were in the base: and the height of a wheel was a cubit and half a cubit.

Bible in Basic English
The four wheels were under the frames, and the rods on which the wheels were fixed were in the base; the wheels were a cubit and a half high.

Bishop's Bible (1568)
And vnder the sydes were foure wheeles, and the axeltrees ioyned fast to the bottome, and the height of euery wheele was a cubite and an halfe.

JPS Old Testament (1917)
And the four wheels were underneath the borders; and the axletrees of the wheels were in the base; and the height of a wheel was a cubit and half a cubit.

King James Version (1611)
And vnder the borders were foure wheeles: & the axletrees of the wheeles were ioyned to the base, and the height of a wheele was a cubite and halfe a cubite.

English Revised Version
And the four wheels were underneath the borders; and the axletrees of the wheels were in the base: and the height of a wheel was a cubit and half a cubit.

Berean Standard Bible
There were four wheels under the panels, and the axles of the wheels were attached to the stand; each wheel was a cubit and a half in diameter.

Wycliffe Bible (1395)
And the foure wheelis, that weren bi foure corneris of the foundement, cleuyden togidere to hem silf vndir the foundement; o wheele hadde o cubit and an half of hiythe.

Young's Literal Translation
And the four wheels [are] under the borders, and the spokes of the wheels [are] in the base, and the height of the one wheel [is] a cubit and half a cubit.

Update Bible Version
And the four wheels were underneath the panels; and the axletrees of the wheels were in the base: and the height of a wheel was a cubit and half a cubit.

Webster's Bible Translation
And under the borders [were] four wheels; and the axletrees of the wheels [were joined] to the base: and the hight of a wheel [was] a cubit and half a cubit.

World English Bible
The four wheels were underneath the panels; and the axles of the wheels were in the base: and the height of a wheel was a cubit and half a cubit.

New King James Version
Under the panels were the four wheels, and the axles of the wheels were joined to the cart. The height of a wheel was one and a half cubits.

New Living Translation
Under the panels were four wheels that were connected to axles that had been cast as one unit with the cart. The wheels were 2 1⁄4 feet in diameter

New Life Bible
Under the sides were the four wheels. The pieces that held the wheels were on the stand. The height of a wheel was one and a half cubits.

New Revised Standard
The four wheels were underneath the borders; the axles of the wheels were in the stands; and the height of a wheel was a cubit and a half.

J.B. Rotherham Emphasized Bible
And, four wheels, were beneath the side-walls, the axletrees of the wheels, being in the stands, - and, the height of each wheel, was a cubit and a half:

Douay-Rheims Bible
And the four wheels, which were at the four corners of the base, were joined one to another under the base: the height of a wheel was a cubit and a half.

Revised Standard Version
And the four wheels were underneath the panels; the axles of the wheels were of one piece with the stands; and the height of a wheel was a cubit and a half.

New American Standard Bible (1995)
The four wheels were underneath the borders, and the axles of the wheels were on the stand. And the height of a wheel was a cubit and a half.

Contextual Overview

¹³King Solomon sent to Tyre and asked Hiram (not the king; another Hiram) to come. Hiram's mother was a widow from the tribe of Naphtali. His father was a Tyrian and a master worker in bronze. Hiram was a real artist—he could do anything with bronze. He came to King Solomon and did all the bronze work. ¹⁵First he cast two pillars in bronze, each twenty-seven feet tall and eighteen feet in circumference. He then cast two capitals in bronze to set on the pillars; each capital was seven and a half feet high and flared at the top in the shape of a lily. Each capital was dressed with an elaborate filigree of seven braided chains and a double row of two hundred pomegranates, setting the pillars off magnificently. He set the pillars up in the entrance porch to The Temple; the pillar to the south he named Security (Jachin) and the pillar to the north Stability (Boaz). The capitals were in the shape of lilies. When the pillars were finished, Hiram's next project was to make the Sea—an immense round basin of cast metal fifteen feet in diameter, seven and a half feet tall, and forty-five feet in circumference. Just under the rim there were two bands of decorative gourds, ten gourds to each foot and a half. The gourds were cast in one piece with the Sea. The Sea was set on twelve bulls, three facing north, three facing west, three facing south, and three facing east; the bulls faced outward supporting the Sea on their hindquarters. The Sea was three inches thick and flared at the rim like a cup, or like a lily. It held about 11,500 gallons. Hiram also made ten washstands of bronze. Each was six feet square and four and a half feet tall. They were made like this: Panels were fastened to the uprights. Lions, bulls, and cherubim were represented on the panels and uprights. Beveled wreath-work bordered the lions and bulls above and below. Each stand was mounted on four bronze wheels with bronze axles. The uprights were cast with decorative relief work. Each stand held a basin on a circular engraved support a foot and a half deep set on a pedestal two and a quarter feet square. The washstand itself was square. The axles were attached under the stand and the wheels fixed to them. The wheels were twenty-seven inches in diameter; they were designed like chariot wheels. Everything—axles, rims, spokes, and hubs—was of cast metal. There was a handle at the four corners of each washstand, the handles cast in one piece with the stand. At the top of the washstand there was a ring about nine inches deep. The uprights and handles were cast with the stand. Everything and every available surface was engraved with cherubim, lions, and palm trees, bordered by arabesques. The washstands were identical, all cast in the same mold. He also made ten bronze washbasins, each six feet in diameter with a capacity of 230 gallons, one basin for each of the ten washstands. He arranged five stands on the south side of The Temple and five on the north. The Sea was placed at the southeast corner of The Temple. Hiram then fashioned the various utensils: buckets and shovels and bowls. Hiram completed all the work he set out to do for King Solomon on The Temple of God : two pillars; two capitals on top of the pillars; two decorative filigrees for the capitals; four hundred pomegranates for the two filigrees (a double row of pomegranates for each filigree); ten washstands each with its washbasin; one Sea; twelve bulls under the Sea; miscellaneous buckets, shovels, and bowls. All these artifacts that Hiram made for King Solomon for The Temple of God were of burnished bronze. He cast them in clay in a foundry on the Jordan plain between Succoth and Zarethan. These artifacts were never weighed—there were far too many! Nobody has any idea how much bronze was used. Solomon was also responsible for all the furniture and accessories in The Temple of God : the gold Altar; the gold Table that held the Bread of the Presence; the pure gold candelabras, five to the right and five to the left in front of the Inner Sanctuary; the gold flowers, lamps, and tongs; the pure gold dishes, wick trimmers, sprinkling bowls, ladles, and censers; the gold sockets for the doors of the Inner Sanctuary, the Holy of Holies, used also for the doors of the Main Sanctuary. That completed all the work King Solomon did on The Temple of God . He then brought in the items consecrated by his father David, the silver and the gold and the artifacts. He placed them all in the treasury of God 's Temple. ²³ It took Solomon another thirteen years to finish building his own palace complex. He built the Palace of the Forest of Lebanon a hundred and fifty feet long, seventy-five feet wide, and forty-five feet high. There were four rows of cedar columns supporting forty-five cedar beams, fifteen in each row, and then roofed with cedar. Windows in groupings of three were set high in the walls on either side. All the doors were rectangular and arranged symmetrically. He built a colonnaded courtyard seventy-five feet long and forty-five wide. It had a roofed porch at the front with ample eaves. He built a court room, the Hall of Justice, where he would decide judicial matters, and paneled it with cedar. He built his personal residence behind the Hall on a similar plan. Solomon also built another one just like it for Pharaoh's daughter, whom he had married. No expense was spared—everything here, inside and out, from foundation to roof was constructed using high-quality stone, accurately cut and shaped and polished. The foundation stones were huge, ranging in size from twelve to fifteen feet, and of the very best quality. The finest stone was used above the foundation, shaped to size and trimmed with cedar. The courtyard was enclosed with a wall made of three layers of stone and topped with cedar timbers, just like the one in the porch of The Temple of God . King Solomon sent to Tyre and asked Hiram (not the king; another Hiram) to come. Hiram's mother was a widow from the tribe of Naphtali. His father was a Tyrian and a master worker in bronze. Hiram was a real artist—he could do anything with bronze. He came to King Solomon and did all the bronze work. First he cast two pillars in bronze, each twenty-seven feet tall and eighteen feet in circumference. He then cast two capitals in bronze to set on the pillars; each capital was seven and a half feet high and flared at the top in the shape of a lily. Each capital was dressed with an elaborate filigree of seven braided chains and a double row of two hundred pomegranates, setting the pillars off magnificently. He set the pillars up in the entrance porch to The Temple; the pillar to the south he named Security (Jachin) and the pillar to the north Stability (Boaz). The capitals were in the shape of lilies. When the pillars were finished, Hiram's next project was to make the Sea—an immense round basin of cast metal fifteen feet in diameter, seven and a half feet tall, and forty-five feet in circumference. Just under the rim there were two bands of decorative gourds, ten gourds to each foot and a half. The gourds were cast in one piece with the Sea. The Sea was set on twelve bulls, three facing north, three facing west, three facing south, and three facing east; the bulls faced outward supporting the Sea on their hindquarters. The Sea was three inches thick and flared at the rim like a cup, or like a lily. It held about 11,500 gallons. Hiram also made ten washstands of bronze. Each was six feet square and four and a half feet tall. They were made like this: Panels were fastened to the uprights. Lions, bulls, and cherubim were represented on the panels and uprights. Beveled wreath-work bordered the lions and bulls above and below. Each stand was mounted on four bronze wheels with bronze axles. The uprights were cast with decorative relief work. Each stand held a basin on a circular engraved support a foot and a half deep set on a pedestal two and a quarter feet square. The washstand itself was square. The axles were attached under the stand and the wheels fixed to them. The wheels were twenty-seven inches in diameter; they were designed like chariot wheels. Everything—axles, rims, spokes, and hubs—was of cast metal. There was a handle at the four corners of each washstand, the handles cast in one piece with the stand. At the top of the washstand there was a ring about nine inches deep. The uprights and handles were cast with the stand. Everything and every available surface was engraved with cherubim, lions, and palm trees, bordered by arabesques. The washstands were identical, all cast in the same mold. He also made ten bronze washbasins, each six feet in diameter with a capacity of 230 gallons, one basin for each of the ten washstands. He arranged five stands on the south side of The Temple and five on the north. The Sea was placed at the southeast corner of The Temple. Hiram then fashioned the various utensils: buckets and shovels and bowls. Hiram completed all the work he set out to do for King Solomon on The Temple of God : two pillars; two capitals on top of the pillars; two decorative filigrees for the capitals; four hundred pomegranates for the two filigrees (a double row of pomegranates for each filigree); ten washstands each with its washbasin; one Sea; twelve bulls under the Sea; miscellaneous buckets, shovels, and bowls. All these artifacts that Hiram made for King Solomon for The Temple of God were of burnished bronze. He cast them in clay in a foundry on the Jordan plain between Succoth and Zarethan. These artifacts were never weighed—there were far too many! Nobody has any idea how much bronze was used. Solomon was also responsible for all the furniture and accessories in The Temple of God : the gold Altar; the gold Table that held the Bread of the Presence; the pure gold candelabras, five to the right and five to the left in front of the Inner Sanctuary; the gold flowers, lamps, and tongs; the pure gold dishes, wick trimmers, sprinkling bowls, ladles, and censers; the gold sockets for the doors of the Inner Sanctuary, the Holy of Holies, used also for the doors of the Main Sanctuary. That completed all the work King Solomon did on The Temple of God . He then brought in the items consecrated by his father David, the silver and the gold and the artifacts. He placed them all in the treasury of God 's Temple. ²⁴ It took Solomon another thirteen years to finish building his own palace complex. He built the Palace of the Forest of Lebanon a hundred and fifty feet long, seventy-five feet wide, and forty-five feet high. There were four rows of cedar columns supporting forty-five cedar beams, fifteen in each row, and then roofed with cedar. Windows in groupings of three were set high in the walls on either side. All the doors were rectangular and arranged symmetrically. He built a colonnaded courtyard seventy-five feet long and forty-five wide. It had a roofed porch at the front with ample eaves. He built a court room, the Hall of Justice, where he would decide judicial matters, and paneled it with cedar. He built his personal residence behind the Hall on a similar plan. Solomon also built another one just like it for Pharaoh's daughter, whom he had married. No expense was spared—everything here, inside and out, from foundation to roof was constructed using high-quality stone, accurately cut and shaped and polished. The foundation stones were huge, ranging in size from twelve to fifteen feet, and of the very best quality. The finest stone was used above the foundation, shaped to size and trimmed with cedar. The courtyard was enclosed with a wall made of three layers of stone and topped with cedar timbers, just like the one in the porch of The Temple of God . King Solomon sent to Tyre and asked Hiram (not the king; another Hiram) to come. Hiram's mother was a widow from the tribe of Naphtali. His father was a Tyrian and a master worker in bronze. Hiram was a real artist—he could do anything with bronze. He came to King Solomon and did all the bronze work. First he cast two pillars in bronze, each twenty-seven feet tall and eighteen feet in circumference. He then cast two capitals in bronze to set on the pillars; each capital was seven and a half feet high and flared at the top in the shape of a lily. Each capital was dressed with an elaborate filigree of seven braided chains and a double row of two hundred pomegranates, setting the pillars off magnificently. He set the pillars up in the entrance porch to The Temple; the pillar to the south he named Security (Jachin) and the pillar to the north Stability (Boaz). The capitals were in the shape of lilies. When the pillars were finished, Hiram's next project was to make the Sea—an immense round basin of cast metal fifteen feet in diameter, seven and a half feet tall, and forty-five feet in circumference. Just under the rim there were two bands of decorative gourds, ten gourds to each foot and a half. The gourds were cast in one piece with the Sea. ²⁵The Sea was set on twelve bulls, three facing north, three facing west, three facing south, and three facing east; the bulls faced outward supporting the Sea on their hindquarters. The Sea was three inches thick and flared at the rim like a cup, or like a lily. It held about 11,500 gallons. ²⁷Hiram also made ten washstands of bronze. Each was six feet square and four and a half feet tall. They were made like this: Panels were fastened to the uprights. Lions, bulls, and cherubim were represented on the panels and uprights. Beveled wreath-work bordered the lions and bulls above and below. Each stand was mounted on four bronze wheels with bronze axles. The uprights were cast with decorative relief work. Each stand held a basin on a circular engraved support a foot and a half deep set on a pedestal two and a quarter feet square. The washstand itself was square. The axles were attached under the stand and the wheels fixed to them. The wheels were twenty-seven inches in diameter; they were designed like chariot wheels. Everything—axles, rims, spokes, and hubs—was of cast metal. ³⁴There was a handle at the four corners of each washstand, the handles cast in one piece with the stand. At the top of the washstand there was a ring about nine inches deep. The uprights and handles were cast with the stand. Everything and every available surface was engraved with cherubim, lions, and palm trees, bordered by arabesques. The washstands were identical, all cast in the same mold. ³⁸He also made ten bronze washbasins, each six feet in diameter with a capacity of 230 gallons, one basin for each of the ten washstands. He arranged five stands on the south side of The Temple and five on the north. The Sea was placed at the southeast corner of The Temple. Hiram then fashioned the various utensils: buckets and shovels and bowls. Hiram completed all the work he set out to do for King Solomon on The Temple of God : two pillars; two capitals on top of the pillars; two decorative filigrees for the capitals; four hundred pomegranates for the two filigrees (a double row of pomegranates for each filigree); ten washstands each with its washbasin; one Sea; twelve bulls under the Sea; miscellaneous buckets, shovels, and bowls. All these artifacts that Hiram made for King Solomon for The Temple of God were of burnished bronze. He cast them in clay in a foundry on the Jordan plain between Succoth and Zarethan. These artifacts were never weighed—there were far too many! Nobody has any idea how much bronze was used. Solomon was also responsible for all the furniture and accessories in The Temple of God : the gold Altar; the gold Table that held the Bread of the Presence; the pure gold candelabras, five to the right and five to the left in front of the Inner Sanctuary; the gold flowers, lamps, and tongs; the pure gold dishes, wick trimmers, sprinkling bowls, ladles, and censers; the gold sockets for the doors of the Inner Sanctuary, the Holy of Holies, used also for the doors of the Main Sanctuary. That completed all the work King Solomon did on The Temple of God . He then brought in the items consecrated by his father David, the silver and the gold and the artifacts. He placed them all in the treasury of God 's Temple. ⁴¹ It took Solomon another thirteen years to finish building his own palace complex. He built the Palace of the Forest of Lebanon a hundred and fifty feet long, seventy-five feet wide, and forty-five feet high. There were four rows of cedar columns supporting forty-five cedar beams, fifteen in each row, and then roofed with cedar. Windows in groupings of three were set high in the walls on either side. All the doors were rectangular and arranged symmetrically. He built a colonnaded courtyard seventy-five feet long and forty-five wide. It had a roofed porch at the front with ample eaves. He built a court room, the Hall of Justice, where he would decide judicial matters, and paneled it with cedar. He built his personal residence behind the Hall on a similar plan. Solomon also built another one just like it for Pharaoh's daughter, whom he had married. No expense was spared—everything here, inside and out, from foundation to roof was constructed using high-quality stone, accurately cut and shaped and polished. The foundation stones were huge, ranging in size from twelve to fifteen feet, and of the very best quality. The finest stone was used above the foundation, shaped to size and trimmed with cedar. The courtyard was enclosed with a wall made of three layers of stone and topped with cedar timbers, just like the one in the porch of The Temple of God . King Solomon sent to Tyre and asked Hiram (not the king; another Hiram) to come. Hiram's mother was a widow from the tribe of Naphtali. His father was a Tyrian and a master worker in bronze. Hiram was a real artist—he could do anything with bronze. He came to King Solomon and did all the bronze work. First he cast two pillars in bronze, each twenty-seven feet tall and eighteen feet in circumference. He then cast two capitals in bronze to set on the pillars; each capital was seven and a half feet high and flared at the top in the shape of a lily. Each capital was dressed with an elaborate filigree of seven braided chains and a double row of two hundred pomegranates, setting the pillars off magnificently. He set the pillars up in the entrance porch to The Temple; the pillar to the south he named Security (Jachin) and the pillar to the north Stability (Boaz). The capitals were in the shape of lilies. When the pillars were finished, Hiram's next project was to make the Sea—an immense round basin of cast metal fifteen feet in diameter, seven and a half feet tall, and forty-five feet in circumference. Just under the rim there were two bands of decorative gourds, ten gourds to each foot and a half. The gourds were cast in one piece with the Sea. The Sea was set on twelve bulls, three facing north, three facing west, three facing south, and three facing east; the bulls faced outward supporting the Sea on their hindquarters. The Sea was three inches thick and flared at the rim like a cup, or like a lily. It held about 11,500 gallons. Hiram also made ten washstands of bronze. Each was six feet square and four and a half feet tall. They were made like this: Panels were fastened to the uprights. Lions, bulls, and cherubim were represented on the panels and uprights. Beveled wreath-work bordered the lions and bulls above and below. Each stand was mounted on four bronze wheels with bronze axles. The uprights were cast with decorative relief work. Each stand held a basin on a circular engraved support a foot and a half deep set on a pedestal two and a quarter feet square. The washstand itself was square. The axles were attached under the stand and the wheels fixed to them. The wheels were twenty-seven inches in diameter; they were designed like chariot wheels. Everything—axles, rims, spokes, and hubs—was of cast metal. There was a handle at the four corners of each washstand, the handles cast in one piece with the stand. At the top of the washstand there was a ring about nine inches deep. The uprights and handles were cast with the stand. Everything and every available surface was engraved with cherubim, lions, and palm trees, bordered by arabesques. The washstands were identical, all cast in the same mold. He also made ten bronze washbasins, each six feet in diameter with a capacity of 230 gallons, one basin for each of the ten washstands. He arranged five stands on the south side of The Temple and five on the north. The Sea was placed at the southeast corner of The Temple. Hiram then fashioned the various utensils: buckets and shovels and bowls. Hiram completed all the work he set out to do for King Solomon on The Temple of God : two pillars; two capitals on top of the pillars; two decorative filigrees for the capitals; four hundred pomegranates for the two filigrees (a double row of pomegranates for each filigree); ten washstands each with its washbasin; one Sea; twelve bulls under the Sea; miscellaneous buckets, shovels, and bowls. All these artifacts that Hiram made for King Solomon for The Temple of God were of burnished bronze. He cast them in clay in a foundry on the Jordan plain between Succoth and Zarethan. These artifacts were never weighed—there were far too many! Nobody has any idea how much bronze was used. Solomon was also responsible for all the furniture and accessories in The Temple of God : the gold Altar; the gold Table that held the Bread of the Presence; the pure gold candelabras, five to the right and five to the left in front of the Inner Sanctuary; the gold flowers, lamps, and tongs; the pure gold dishes, wick trimmers, sprinkling bowls, ladles, and censers; the gold sockets for the doors of the Inner Sanctuary, the Holy of Holies, used also for the doors of the Main Sanctuary. That completed all the work King Solomon did on The Temple of God . He then brought in the items consecrated by his father David, the silver and the gold and the artifacts. He placed them all in the treasury of God 's Temple. ⁴² It took Solomon another thirteen years to finish building his own palace complex. He built the Palace of the Forest of Lebanon a hundred and fifty feet long, seventy-five feet wide, and forty-five feet high. There were four rows of cedar columns supporting forty-five cedar beams, fifteen in each row, and then roofed with cedar. Windows in groupings of three were set high in the walls on either side. All the doors were rectangular and arranged symmetrically. He built a colonnaded courtyard seventy-five feet long and forty-five wide. It had a roofed porch at the front with ample eaves. He built a court room, the Hall of Justice, where he would decide judicial matters, and paneled it with cedar. He built his personal residence behind the Hall on a similar plan. Solomon also built another one just like it for Pharaoh's daughter, whom he had married. No expense was spared—everything here, inside and out, from foundation to roof was constructed using high-quality stone, accurately cut and shaped and polished. The foundation stones were huge, ranging in size from twelve to fifteen feet, and of the very best quality. The finest stone was used above the foundation, shaped to size and trimmed with cedar. The courtyard was enclosed with a wall made of three layers of stone and topped with cedar timbers, just like the one in the porch of The Temple of God . King Solomon sent to Tyre and asked Hiram (not the king; another Hiram) to come. Hiram's mother was a widow from the tribe of Naphtali. His father was a Tyrian and a master worker in bronze. Hiram was a real artist—he could do anything with bronze. He came to King Solomon and did all the bronze work. First he cast two pillars in bronze, each twenty-seven feet tall and eighteen feet in circumference. He then cast two capitals in bronze to set on the pillars; each capital was seven and a half feet high and flared at the top in the shape of a lily. Each capital was dressed with an elaborate filigree of seven braided chains and a double row of two hundred pomegranates, setting the pillars off magnificently. He set the pillars up in the entrance porch to The Temple; the pillar to the south he named Security (Jachin) and the pillar to the north Stability (Boaz). The capitals were in the shape of lilies. When the pillars were finished, Hiram's next project was to make the Sea—an immense round basin of cast metal fifteen feet in diameter, seven and a half feet tall, and forty-five feet in circumference. Just under the rim there were two bands of decorative gourds, ten gourds to each foot and a half. The gourds were cast in one piece with the Sea. The Sea was set on twelve bulls, three facing north, three facing west, three facing south, and three facing east; the bulls faced outward supporting the Sea on their hindquarters. The Sea was three inches thick and flared at the rim like a cup, or like a lily. It held about 11,500 gallons. Hiram also made ten washstands of bronze. Each was six feet square and four and a half feet tall. They were made like this: Panels were fastened to the uprights. Lions, bulls, and cherubim were represented on the panels and uprights. Beveled wreath-work bordered the lions and bulls above and below. Each stand was mounted on four bronze wheels with bronze axles. The uprights were cast with decorative relief work. Each stand held a basin on a circular engraved support a foot and a half deep set on a pedestal two and a quarter feet square. The washstand itself was square. The axles were attached under the stand and the wheels fixed to them. The wheels were twenty-seven inches in diameter; they were designed like chariot wheels. Everything—axles, rims, spokes, and hubs—was of cast metal. There was a handle at the four corners of each washstand, the handles cast in one piece with the stand. At the top of the washstand there was a ring about nine inches deep. The uprights and handles were cast with the stand. Everything and every available surface was engraved with cherubim, lions, and palm trees, bordered by arabesques. The washstands were identical, all cast in the same mold. He also made ten bronze washbasins, each six feet in diameter with a capacity of 230 gallons, one basin for each of the ten washstands. He arranged five stands on the south side of The Temple and five on the north. The Sea was placed at the southeast corner of The Temple. Hiram then fashioned the various utensils: buckets and shovels and bowls. Hiram completed all the work he set out to do for King Solomon on The Temple of God : two pillars; two capitals on top of the pillars; two decorative filigrees for the capitals; four hundred pomegranates for the two filigrees (a double row of pomegranates for each filigree); ten washstands each with its washbasin; one Sea; twelve bulls under the Sea; miscellaneous buckets, shovels, and bowls. All these artifacts that Hiram made for King Solomon for The Temple of God were of burnished bronze. He cast them in clay in a foundry on the Jordan plain between Succoth and Zarethan. These artifacts were never weighed—there were far too many! Nobody has any idea how much bronze was used. Solomon was also responsible for all the furniture and accessories in The Temple of God : the gold Altar; the gold Table that held the Bread of the Presence; the pure gold candelabras, five to the right and five to the left in front of the Inner Sanctuary; the gold flowers, lamps, and tongs; the pure gold dishes, wick trimmers, sprinkling bowls, ladles, and censers; the gold sockets for the doors of the Inner Sanctuary, the Holy of Holies, used also for the doors of the Main Sanctuary. That completed all the work King Solomon did on The Temple of God . He then brought in the items consecrated by his father David, the silver and the gold and the artifacts. He placed them all in the treasury of God 's Temple.

Bible Verse Review
  from Treasury of Scripure Knowledge

joined to the base: Heb. in the base, 1 Kings 7:32

Gill's Notes on the Bible

And under the borders were four wheels,.... Not under the borders last mentioned, but those in 1 Kings 7:29,

and the axle trees of the wheels [were] joined to the base; to the four sides of it:

and the height of a wheel was a cubit and half a cubit; that is, from the plate of brass on which it stood, to the axis or semicircle of it; so that the highest part of the ring being also a cubit and an half, reached to the top of the base, it being but three cubits high, 1 Kings 7:27.

Barnes' Notes on the Bible

With the diameter (2 14 ft.) of the wheel here, may be compared that of the earliest Assyrian chariot-wheels, which was under 3 feet; and that of the front wheels seen in representations of Assyrian close carriages, which scarcely exceed 14th of the height of the entire vehicle. The wheels of these moveable lavers appear to have been a little less than 15th of the height of the whole structure.