1 Kings 7:35

THE MESSAGE

Parallel Translations

Christian Standard Bible®
At the top of the cart was a band nine inches high encircling it; also, at the top of the cart, its braces and its frames were one piece with it.

Hebrew Names Version
In the top of the base was there a round compass half a cubit high; and on the top of the base the stays of it and the panels of it were of the same.

King James Version
And in the top of the base was there a round compass of half a cubit high: and on the top of the base the ledges thereof and the borders thereof were of the same.

English Standard Version
And on the top of the stand there was a round band half a cubit high; and on the top of the stand its stays and its panels were of one piece with it.

New Century Version
A strip of bronze around the top of each stand was nine inches deep. It was also made as one piece with the stand.

New English Translation
On top of each stand was a round opening three-quarters of a foot deep; there were also supports and frames on top of the stands.

Amplified Bible
On the top of the stand there was a circular piece half a cubit high, and on the top of the stand its supports and borders were part of it.

New American Standard Bible
And on the top of the stand there was a circular form half a cubit high, and on the top of the stand its stays and its borders were part of it.

Geneva Bible (1587)
And in the toppe of the base was a rounde compasse of halfe a cubite hie round about: & vpon the toppe of the base the ledges thereof and the borders thereof were of the same.

Legacy Standard Bible
And on the top of the stand there was a circular form half a cubit high, and on the top of the stand its stays and its borders were part of it.

Complete Jewish Bible
In the top of the trolley was a circular support ten-and-a-half inches high, and the trolley's corner-posts and panels were attached to its top.

Darby Translation
And in the top of the base there was a circular elevation of half a cubit round about; and on the top of the base its stays and its panels were of the same.

Easy-to-Read Version
There was a strip of bronze around the top of each cart. It was made as one piece with the cart.

George Lamsa Translation
The supports and the frame of the base were half a cubit; and on the top of the base there was a rim; and the top of the base, its axletrees, and its borders were of the same.

Good News Translation
There was a 9-inch band around the top of each cart; its supports and the panels were of one piece with the cart.

Lexham English Bible
On top of the stand was half a cubit deep, circular all around, and on the top of the stand were its supports and its frames.

Literal Translation
And in the top of the base was a round compass of half a cubit high. And on the top of the base its sides and its borders were from it.

Miles Coverdale Bible (1535)
And on the soket aboue vpon the seate a cubyte and an halfe rounde aboute, there were ledges and sydes harde on the seate.

American Standard Version
And in the top of the base was there a round compass half a cubit high; and on the top of the base the stays thereof and the panels thereof were of the same.

Bible in Basic English
And at the top of the base there was a round vessel, half a cubit high;

Bishop's Bible (1568)
And in the height of the bottome was there a rounde compasse of halfe a cubite hie: and in that height of the bottome there proceeded both ledges and sydes out of the same.

JPS Old Testament (1917)
And in the top of the base was there a round compass of half a cubit high; and on the top of the base the stays thereof and the borders thereof were of one piece therewith.

King James Version (1611)
And in the top of the base was there a round compasse of halfe a cubite high: and on the top of the base the ledges thereof, and the borders thereof were of the same.

English Revised Version
And in the top of the base was there a round compass of half a cubit high: and on the top of the base the stays thereof and the borders thereof were of the same.

Berean Standard Bible
At the top of each stand was a circular band half a cubit high. The supports and panels were cast as a unit with the top of the stand.

Wycliffe Bible (1395)
Sotheli in the hiynesse of the foundement was sum roundenesse, of o cubite and an half, so maad craftili, that the waischyng vessel myyte be set aboue, hauynge his purtreiyngis, and dyuerse grauyngis of it silf.

Young's Literal Translation
And in the top of the base [is] the half of a cubit in the height all round about; and on the top of the base its spokes and its borders [are] of the same.

Update Bible Version
And in the top of the base there was a round compass half a cubit high; and on the top of the base the stays thereof and the panels thereof were of the same.

Webster's Bible Translation
And in the top of the base [was there] a round compass of half a cubit high: and on the top of the base its ledges and its borders [were] of the same.

World English Bible
In the top of the base was there a round compass half a cubit high; and on the top of the base the stays of it and the panels of it were of the same.

New King James Version
On the top of the cart, at the height of half a cubit, it was perfectly round. And on the top of the cart, its flanges and its panels were of the same casting.

New Living Translation
Around the top of each cart was a rim nine inches wide. The corner supports and side panels were cast as one unit with the cart.

New Life Bible
A narrow piece went all the way around the top that held it up and the sides were of one piece.

New Revised Standard
On the top of the stand there was a round band half a cubit high; on the top of the stand, its stays and its borders were of one piece with it.

J.B. Rotherham Emphasized Bible
And, in the top of the stand, half a cubit in height, was a circular piece round about, - and, on the top of the stand, the tenons thereof, and, the side-walls thereof, were of the same.

Douay-Rheims Bible
And on the top of the base, there was a round compass of half a cubit, so wrought that the laver might be set thereon, having its gravings, and divers sculptures of itself.

Revised Standard Version
And on the top of the stand there was a round band half a cubit high; and on the top of the stand its stays and its panels were of one piece with it.

New American Standard Bible (1995)
On the top of the stand there was a circular form half a cubit high, and on the top of the stand its stays and its borders were part of it.

Contextual Overview

¹³King Solomon sent to Tyre and asked Hiram (not the king; another Hiram) to come. Hiram's mother was a widow from the tribe of Naphtali. His father was a Tyrian and a master worker in bronze. Hiram was a real artist—he could do anything with bronze. He came to King Solomon and did all the bronze work. ¹⁵First he cast two pillars in bronze, each twenty-seven feet tall and eighteen feet in circumference. He then cast two capitals in bronze to set on the pillars; each capital was seven and a half feet high and flared at the top in the shape of a lily. Each capital was dressed with an elaborate filigree of seven braided chains and a double row of two hundred pomegranates, setting the pillars off magnificently. He set the pillars up in the entrance porch to The Temple; the pillar to the south he named Security (Jachin) and the pillar to the north Stability (Boaz). The capitals were in the shape of lilies. When the pillars were finished, Hiram's next project was to make the Sea—an immense round basin of cast metal fifteen feet in diameter, seven and a half feet tall, and forty-five feet in circumference. Just under the rim there were two bands of decorative gourds, ten gourds to each foot and a half. The gourds were cast in one piece with the Sea. The Sea was set on twelve bulls, three facing north, three facing west, three facing south, and three facing east; the bulls faced outward supporting the Sea on their hindquarters. The Sea was three inches thick and flared at the rim like a cup, or like a lily. It held about 11,500 gallons. Hiram also made ten washstands of bronze. Each was six feet square and four and a half feet tall. They were made like this: Panels were fastened to the uprights. Lions, bulls, and cherubim were represented on the panels and uprights. Beveled wreath-work bordered the lions and bulls above and below. Each stand was mounted on four bronze wheels with bronze axles. The uprights were cast with decorative relief work. Each stand held a basin on a circular engraved support a foot and a half deep set on a pedestal two and a quarter feet square. The washstand itself was square. The axles were attached under the stand and the wheels fixed to them. The wheels were twenty-seven inches in diameter; they were designed like chariot wheels. Everything—axles, rims, spokes, and hubs—was of cast metal. There was a handle at the four corners of each washstand, the handles cast in one piece with the stand. At the top of the washstand there was a ring about nine inches deep. The uprights and handles were cast with the stand. Everything and every available surface was engraved with cherubim, lions, and palm trees, bordered by arabesques. The washstands were identical, all cast in the same mold. He also made ten bronze washbasins, each six feet in diameter with a capacity of 230 gallons, one basin for each of the ten washstands. He arranged five stands on the south side of The Temple and five on the north. The Sea was placed at the southeast corner of The Temple. Hiram then fashioned the various utensils: buckets and shovels and bowls. Hiram completed all the work he set out to do for King Solomon on The Temple of God : two pillars; two capitals on top of the pillars; two decorative filigrees for the capitals; four hundred pomegranates for the two filigrees (a double row of pomegranates for each filigree); ten washstands each with its washbasin; one Sea; twelve bulls under the Sea; miscellaneous buckets, shovels, and bowls. All these artifacts that Hiram made for King Solomon for The Temple of God were of burnished bronze. He cast them in clay in a foundry on the Jordan plain between Succoth and Zarethan. These artifacts were never weighed—there were far too many! Nobody has any idea how much bronze was used. Solomon was also responsible for all the furniture and accessories in The Temple of God : the gold Altar; the gold Table that held the Bread of the Presence; the pure gold candelabras, five to the right and five to the left in front of the Inner Sanctuary; the gold flowers, lamps, and tongs; the pure gold dishes, wick trimmers, sprinkling bowls, ladles, and censers; the gold sockets for the doors of the Inner Sanctuary, the Holy of Holies, used also for the doors of the Main Sanctuary. That completed all the work King Solomon did on The Temple of God . He then brought in the items consecrated by his father David, the silver and the gold and the artifacts. He placed them all in the treasury of God 's Temple. ²³ It took Solomon another thirteen years to finish building his own palace complex. He built the Palace of the Forest of Lebanon a hundred and fifty feet long, seventy-five feet wide, and forty-five feet high. There were four rows of cedar columns supporting forty-five cedar beams, fifteen in each row, and then roofed with cedar. Windows in groupings of three were set high in the walls on either side. All the doors were rectangular and arranged symmetrically. He built a colonnaded courtyard seventy-five feet long and forty-five wide. It had a roofed porch at the front with ample eaves. He built a court room, the Hall of Justice, where he would decide judicial matters, and paneled it with cedar. He built his personal residence behind the Hall on a similar plan. Solomon also built another one just like it for Pharaoh's daughter, whom he had married. No expense was spared—everything here, inside and out, from foundation to roof was constructed using high-quality stone, accurately cut and shaped and polished. The foundation stones were huge, ranging in size from twelve to fifteen feet, and of the very best quality. The finest stone was used above the foundation, shaped to size and trimmed with cedar. The courtyard was enclosed with a wall made of three layers of stone and topped with cedar timbers, just like the one in the porch of The Temple of God . King Solomon sent to Tyre and asked Hiram (not the king; another Hiram) to come. Hiram's mother was a widow from the tribe of Naphtali. His father was a Tyrian and a master worker in bronze. Hiram was a real artist—he could do anything with bronze. He came to King Solomon and did all the bronze work. First he cast two pillars in bronze, each twenty-seven feet tall and eighteen feet in circumference. He then cast two capitals in bronze to set on the pillars; each capital was seven and a half feet high and flared at the top in the shape of a lily. Each capital was dressed with an elaborate filigree of seven braided chains and a double row of two hundred pomegranates, setting the pillars off magnificently. He set the pillars up in the entrance porch to The Temple; the pillar to the south he named Security (Jachin) and the pillar to the north Stability (Boaz). The capitals were in the shape of lilies. When the pillars were finished, Hiram's next project was to make the Sea—an immense round basin of cast metal fifteen feet in diameter, seven and a half feet tall, and forty-five feet in circumference. Just under the rim there were two bands of decorative gourds, ten gourds to each foot and a half. The gourds were cast in one piece with the Sea. The Sea was set on twelve bulls, three facing north, three facing west, three facing south, and three facing east; the bulls faced outward supporting the Sea on their hindquarters. The Sea was three inches thick and flared at the rim like a cup, or like a lily. It held about 11,500 gallons. Hiram also made ten washstands of bronze. Each was six feet square and four and a half feet tall. They were made like this: Panels were fastened to the uprights. Lions, bulls, and cherubim were represented on the panels and uprights. Beveled wreath-work bordered the lions and bulls above and below. Each stand was mounted on four bronze wheels with bronze axles. The uprights were cast with decorative relief work. Each stand held a basin on a circular engraved support a foot and a half deep set on a pedestal two and a quarter feet square. The washstand itself was square. The axles were attached under the stand and the wheels fixed to them. The wheels were twenty-seven inches in diameter; they were designed like chariot wheels. Everything—axles, rims, spokes, and hubs—was of cast metal. There was a handle at the four corners of each washstand, the handles cast in one piece with the stand. At the top of the washstand there was a ring about nine inches deep. The uprights and handles were cast with the stand. Everything and every available surface was engraved with cherubim, lions, and palm trees, bordered by arabesques. The washstands were identical, all cast in the same mold. He also made ten bronze washbasins, each six feet in diameter with a capacity of 230 gallons, one basin for each of the ten washstands. He arranged five stands on the south side of The Temple and five on the north. The Sea was placed at the southeast corner of The Temple. Hiram then fashioned the various utensils: buckets and shovels and bowls. Hiram completed all the work he set out to do for King Solomon on The Temple of God : two pillars; two capitals on top of the pillars; two decorative filigrees for the capitals; four hundred pomegranates for the two filigrees (a double row of pomegranates for each filigree); ten washstands each with its washbasin; one Sea; twelve bulls under the Sea; miscellaneous buckets, shovels, and bowls. All these artifacts that Hiram made for King Solomon for The Temple of God were of burnished bronze. He cast them in clay in a foundry on the Jordan plain between Succoth and Zarethan. These artifacts were never weighed—there were far too many! Nobody has any idea how much bronze was used. Solomon was also responsible for all the furniture and accessories in The Temple of God : the gold Altar; the gold Table that held the Bread of the Presence; the pure gold candelabras, five to the right and five to the left in front of the Inner Sanctuary; the gold flowers, lamps, and tongs; the pure gold dishes, wick trimmers, sprinkling bowls, ladles, and censers; the gold sockets for the doors of the Inner Sanctuary, the Holy of Holies, used also for the doors of the Main Sanctuary. That completed all the work King Solomon did on The Temple of God . He then brought in the items consecrated by his father David, the silver and the gold and the artifacts. He placed them all in the treasury of God 's Temple. ²⁴ It took Solomon another thirteen years to finish building his own palace complex. He built the Palace of the Forest of Lebanon a hundred and fifty feet long, seventy-five feet wide, and forty-five feet high. There were four rows of cedar columns supporting forty-five cedar beams, fifteen in each row, and then roofed with cedar. Windows in groupings of three were set high in the walls on either side. All the doors were rectangular and arranged symmetrically. He built a colonnaded courtyard seventy-five feet long and forty-five wide. It had a roofed porch at the front with ample eaves. He built a court room, the Hall of Justice, where he would decide judicial matters, and paneled it with cedar. He built his personal residence behind the Hall on a similar plan. Solomon also built another one just like it for Pharaoh's daughter, whom he had married. No expense was spared—everything here, inside and out, from foundation to roof was constructed using high-quality stone, accurately cut and shaped and polished. The foundation stones were huge, ranging in size from twelve to fifteen feet, and of the very best quality. The finest stone was used above the foundation, shaped to size and trimmed with cedar. The courtyard was enclosed with a wall made of three layers of stone and topped with cedar timbers, just like the one in the porch of The Temple of God . King Solomon sent to Tyre and asked Hiram (not the king; another Hiram) to come. Hiram's mother was a widow from the tribe of Naphtali. His father was a Tyrian and a master worker in bronze. Hiram was a real artist—he could do anything with bronze. He came to King Solomon and did all the bronze work. First he cast two pillars in bronze, each twenty-seven feet tall and eighteen feet in circumference. He then cast two capitals in bronze to set on the pillars; each capital was seven and a half feet high and flared at the top in the shape of a lily. Each capital was dressed with an elaborate filigree of seven braided chains and a double row of two hundred pomegranates, setting the pillars off magnificently. He set the pillars up in the entrance porch to The Temple; the pillar to the south he named Security (Jachin) and the pillar to the north Stability (Boaz). The capitals were in the shape of lilies. When the pillars were finished, Hiram's next project was to make the Sea—an immense round basin of cast metal fifteen feet in diameter, seven and a half feet tall, and forty-five feet in circumference. Just under the rim there were two bands of decorative gourds, ten gourds to each foot and a half. The gourds were cast in one piece with the Sea. ²⁵The Sea was set on twelve bulls, three facing north, three facing west, three facing south, and three facing east; the bulls faced outward supporting the Sea on their hindquarters. The Sea was three inches thick and flared at the rim like a cup, or like a lily. It held about 11,500 gallons. ²⁷Hiram also made ten washstands of bronze. Each was six feet square and four and a half feet tall. They were made like this: Panels were fastened to the uprights. Lions, bulls, and cherubim were represented on the panels and uprights. Beveled wreath-work bordered the lions and bulls above and below. Each stand was mounted on four bronze wheels with bronze axles. The uprights were cast with decorative relief work. Each stand held a basin on a circular engraved support a foot and a half deep set on a pedestal two and a quarter feet square. The washstand itself was square. The axles were attached under the stand and the wheels fixed to them. The wheels were twenty-seven inches in diameter; they were designed like chariot wheels. Everything—axles, rims, spokes, and hubs—was of cast metal. ³⁴There was a handle at the four corners of each washstand, the handles cast in one piece with the stand. At the top of the washstand there was a ring about nine inches deep. The uprights and handles were cast with the stand. Everything and every available surface was engraved with cherubim, lions, and palm trees, bordered by arabesques. The washstands were identical, all cast in the same mold. ³⁸He also made ten bronze washbasins, each six feet in diameter with a capacity of 230 gallons, one basin for each of the ten washstands. He arranged five stands on the south side of The Temple and five on the north. The Sea was placed at the southeast corner of The Temple. Hiram then fashioned the various utensils: buckets and shovels and bowls. Hiram completed all the work he set out to do for King Solomon on The Temple of God : two pillars; two capitals on top of the pillars; two decorative filigrees for the capitals; four hundred pomegranates for the two filigrees (a double row of pomegranates for each filigree); ten washstands each with its washbasin; one Sea; twelve bulls under the Sea; miscellaneous buckets, shovels, and bowls. All these artifacts that Hiram made for King Solomon for The Temple of God were of burnished bronze. He cast them in clay in a foundry on the Jordan plain between Succoth and Zarethan. These artifacts were never weighed—there were far too many! Nobody has any idea how much bronze was used. Solomon was also responsible for all the furniture and accessories in The Temple of God : the gold Altar; the gold Table that held the Bread of the Presence; the pure gold candelabras, five to the right and five to the left in front of the Inner Sanctuary; the gold flowers, lamps, and tongs; the pure gold dishes, wick trimmers, sprinkling bowls, ladles, and censers; the gold sockets for the doors of the Inner Sanctuary, the Holy of Holies, used also for the doors of the Main Sanctuary. That completed all the work King Solomon did on The Temple of God . He then brought in the items consecrated by his father David, the silver and the gold and the artifacts. He placed them all in the treasury of God 's Temple. ⁴¹ It took Solomon another thirteen years to finish building his own palace complex. He built the Palace of the Forest of Lebanon a hundred and fifty feet long, seventy-five feet wide, and forty-five feet high. There were four rows of cedar columns supporting forty-five cedar beams, fifteen in each row, and then roofed with cedar. Windows in groupings of three were set high in the walls on either side. All the doors were rectangular and arranged symmetrically. He built a colonnaded courtyard seventy-five feet long and forty-five wide. It had a roofed porch at the front with ample eaves. He built a court room, the Hall of Justice, where he would decide judicial matters, and paneled it with cedar. He built his personal residence behind the Hall on a similar plan. Solomon also built another one just like it for Pharaoh's daughter, whom he had married. No expense was spared—everything here, inside and out, from foundation to roof was constructed using high-quality stone, accurately cut and shaped and polished. The foundation stones were huge, ranging in size from twelve to fifteen feet, and of the very best quality. The finest stone was used above the foundation, shaped to size and trimmed with cedar. The courtyard was enclosed with a wall made of three layers of stone and topped with cedar timbers, just like the one in the porch of The Temple of God . King Solomon sent to Tyre and asked Hiram (not the king; another Hiram) to come. Hiram's mother was a widow from the tribe of Naphtali. His father was a Tyrian and a master worker in bronze. Hiram was a real artist—he could do anything with bronze. He came to King Solomon and did all the bronze work. First he cast two pillars in bronze, each twenty-seven feet tall and eighteen feet in circumference. He then cast two capitals in bronze to set on the pillars; each capital was seven and a half feet high and flared at the top in the shape of a lily. Each capital was dressed with an elaborate filigree of seven braided chains and a double row of two hundred pomegranates, setting the pillars off magnificently. He set the pillars up in the entrance porch to The Temple; the pillar to the south he named Security (Jachin) and the pillar to the north Stability (Boaz). The capitals were in the shape of lilies. When the pillars were finished, Hiram's next project was to make the Sea—an immense round basin of cast metal fifteen feet in diameter, seven and a half feet tall, and forty-five feet in circumference. Just under the rim there were two bands of decorative gourds, ten gourds to each foot and a half. The gourds were cast in one piece with the Sea. The Sea was set on twelve bulls, three facing north, three facing west, three facing south, and three facing east; the bulls faced outward supporting the Sea on their hindquarters. The Sea was three inches thick and flared at the rim like a cup, or like a lily. It held about 11,500 gallons. Hiram also made ten washstands of bronze. Each was six feet square and four and a half feet tall. They were made like this: Panels were fastened to the uprights. Lions, bulls, and cherubim were represented on the panels and uprights. Beveled wreath-work bordered the lions and bulls above and below. Each stand was mounted on four bronze wheels with bronze axles. The uprights were cast with decorative relief work. Each stand held a basin on a circular engraved support a foot and a half deep set on a pedestal two and a quarter feet square. The washstand itself was square. The axles were attached under the stand and the wheels fixed to them. The wheels were twenty-seven inches in diameter; they were designed like chariot wheels. Everything—axles, rims, spokes, and hubs—was of cast metal. There was a handle at the four corners of each washstand, the handles cast in one piece with the stand. At the top of the washstand there was a ring about nine inches deep. The uprights and handles were cast with the stand. Everything and every available surface was engraved with cherubim, lions, and palm trees, bordered by arabesques. The washstands were identical, all cast in the same mold. He also made ten bronze washbasins, each six feet in diameter with a capacity of 230 gallons, one basin for each of the ten washstands. He arranged five stands on the south side of The Temple and five on the north. The Sea was placed at the southeast corner of The Temple. Hiram then fashioned the various utensils: buckets and shovels and bowls. Hiram completed all the work he set out to do for King Solomon on The Temple of God : two pillars; two capitals on top of the pillars; two decorative filigrees for the capitals; four hundred pomegranates for the two filigrees (a double row of pomegranates for each filigree); ten washstands each with its washbasin; one Sea; twelve bulls under the Sea; miscellaneous buckets, shovels, and bowls. All these artifacts that Hiram made for King Solomon for The Temple of God were of burnished bronze. He cast them in clay in a foundry on the Jordan plain between Succoth and Zarethan. These artifacts were never weighed—there were far too many! Nobody has any idea how much bronze was used. Solomon was also responsible for all the furniture and accessories in The Temple of God : the gold Altar; the gold Table that held the Bread of the Presence; the pure gold candelabras, five to the right and five to the left in front of the Inner Sanctuary; the gold flowers, lamps, and tongs; the pure gold dishes, wick trimmers, sprinkling bowls, ladles, and censers; the gold sockets for the doors of the Inner Sanctuary, the Holy of Holies, used also for the doors of the Main Sanctuary. That completed all the work King Solomon did on The Temple of God . He then brought in the items consecrated by his father David, the silver and the gold and the artifacts. He placed them all in the treasury of God 's Temple. ⁴² It took Solomon another thirteen years to finish building his own palace complex. He built the Palace of the Forest of Lebanon a hundred and fifty feet long, seventy-five feet wide, and forty-five feet high. There were four rows of cedar columns supporting forty-five cedar beams, fifteen in each row, and then roofed with cedar. Windows in groupings of three were set high in the walls on either side. All the doors were rectangular and arranged symmetrically. He built a colonnaded courtyard seventy-five feet long and forty-five wide. It had a roofed porch at the front with ample eaves. He built a court room, the Hall of Justice, where he would decide judicial matters, and paneled it with cedar. He built his personal residence behind the Hall on a similar plan. Solomon also built another one just like it for Pharaoh's daughter, whom he had married. No expense was spared—everything here, inside and out, from foundation to roof was constructed using high-quality stone, accurately cut and shaped and polished. The foundation stones were huge, ranging in size from twelve to fifteen feet, and of the very best quality. The finest stone was used above the foundation, shaped to size and trimmed with cedar. The courtyard was enclosed with a wall made of three layers of stone and topped with cedar timbers, just like the one in the porch of The Temple of God . King Solomon sent to Tyre and asked Hiram (not the king; another Hiram) to come. Hiram's mother was a widow from the tribe of Naphtali. His father was a Tyrian and a master worker in bronze. Hiram was a real artist—he could do anything with bronze. He came to King Solomon and did all the bronze work. First he cast two pillars in bronze, each twenty-seven feet tall and eighteen feet in circumference. He then cast two capitals in bronze to set on the pillars; each capital was seven and a half feet high and flared at the top in the shape of a lily. Each capital was dressed with an elaborate filigree of seven braided chains and a double row of two hundred pomegranates, setting the pillars off magnificently. He set the pillars up in the entrance porch to The Temple; the pillar to the south he named Security (Jachin) and the pillar to the north Stability (Boaz). The capitals were in the shape of lilies. When the pillars were finished, Hiram's next project was to make the Sea—an immense round basin of cast metal fifteen feet in diameter, seven and a half feet tall, and forty-five feet in circumference. Just under the rim there were two bands of decorative gourds, ten gourds to each foot and a half. The gourds were cast in one piece with the Sea. The Sea was set on twelve bulls, three facing north, three facing west, three facing south, and three facing east; the bulls faced outward supporting the Sea on their hindquarters. The Sea was three inches thick and flared at the rim like a cup, or like a lily. It held about 11,500 gallons. Hiram also made ten washstands of bronze. Each was six feet square and four and a half feet tall. They were made like this: Panels were fastened to the uprights. Lions, bulls, and cherubim were represented on the panels and uprights. Beveled wreath-work bordered the lions and bulls above and below. Each stand was mounted on four bronze wheels with bronze axles. The uprights were cast with decorative relief work. Each stand held a basin on a circular engraved support a foot and a half deep set on a pedestal two and a quarter feet square. The washstand itself was square. The axles were attached under the stand and the wheels fixed to them. The wheels were twenty-seven inches in diameter; they were designed like chariot wheels. Everything—axles, rims, spokes, and hubs—was of cast metal. There was a handle at the four corners of each washstand, the handles cast in one piece with the stand. At the top of the washstand there was a ring about nine inches deep. The uprights and handles were cast with the stand. Everything and every available surface was engraved with cherubim, lions, and palm trees, bordered by arabesques. The washstands were identical, all cast in the same mold. He also made ten bronze washbasins, each six feet in diameter with a capacity of 230 gallons, one basin for each of the ten washstands. He arranged five stands on the south side of The Temple and five on the north. The Sea was placed at the southeast corner of The Temple. Hiram then fashioned the various utensils: buckets and shovels and bowls. Hiram completed all the work he set out to do for King Solomon on The Temple of God : two pillars; two capitals on top of the pillars; two decorative filigrees for the capitals; four hundred pomegranates for the two filigrees (a double row of pomegranates for each filigree); ten washstands each with its washbasin; one Sea; twelve bulls under the Sea; miscellaneous buckets, shovels, and bowls. All these artifacts that Hiram made for King Solomon for The Temple of God were of burnished bronze. He cast them in clay in a foundry on the Jordan plain between Succoth and Zarethan. These artifacts were never weighed—there were far too many! Nobody has any idea how much bronze was used. Solomon was also responsible for all the furniture and accessories in The Temple of God : the gold Altar; the gold Table that held the Bread of the Presence; the pure gold candelabras, five to the right and five to the left in front of the Inner Sanctuary; the gold flowers, lamps, and tongs; the pure gold dishes, wick trimmers, sprinkling bowls, ladles, and censers; the gold sockets for the doors of the Inner Sanctuary, the Holy of Holies, used also for the doors of the Main Sanctuary. That completed all the work King Solomon did on The Temple of God . He then brought in the items consecrated by his father David, the silver and the gold and the artifacts. He placed them all in the treasury of God 's Temple.

Bible Verse Review
  from Treasury of Scripure Knowledge

Gill's Notes on the Bible

And in the top of the base was there a round compass of half a cubit high,.... The same with the chapiter, 1 Kings 7:31 which rose up straight half a cubit, and widening upwards half a cubit more, here called the round compass of it:

and on the top of the base, the ledges thereof and the borders thereof, were of the same; of the same piece of brass with the base, all being cast together.

Barnes' Notes on the Bible

A round compass - A circular elevation, half a cubit high, rather than a circular depression, half a cubit deep. Compare 1 Kings 7:29. The “ledges” and “borders” of the top of the base were its “hands” and its “panels.” These “hands,” distinct from the “shoulders” 1 Kings 7:30, were probably supports, adorned with engraved plates 1 Kings 7:36, either of the elevated circle on which the laver stood, or of the lower part of the laver itself. Both panels and “hands” were “of the same,” i. e. of one piece with the base, cast at the same time.